Send a drawing
Aluminium extrusion hall with a long profile running out of the press along the cooling table, rows of profiles on both sides, skylight haze

Aluminium extrusionto your drawing.

New dies or ours, finished and machined in one plant.

Request a quoteSee profile lines
Plant
Shandong, China
Alloys
6063 · 6061 · 6005A · 6082
Finishes
Anodised · powder · wood-grain
Send
DWG · STEP · PDF
MOQ
500 kg per profile

Six profile lines, one press hall

Each line has its own die library and alloy.

All profile lines
Aluminium window frame being fitted into a window opening on a building site

Windows
and doors

6063-T5

Aluminium curtain-wall mullions and transoms being installed at a floor edge

Curtain
wall

6063-T6

Machine frame built from T-slot aluminium profiles in an automation cell

T-slot
framing

6063-T5

Finned aluminium heat sink mounted inside an open electrical cabinet

Heat
sinks

6063-T5

Recessed aluminium LED channel lit as a line in a corridor ceiling

LED
channels

6063-T5

Aluminium mounting rails and clamps under rooftop solar panels

Solar
mounting rails

6005A-T6

Worker seen from behind checking a cut aluminium profile with a caliper at the saw table
Checking a section off the saw.

We cut our own dies, then extrude, finish and machine every profile in one plant.

Die shop, presses, finishing lines and CNC under one roof in Shandong.

About the plant
6
profile lines, from window frames to solar rails
4
alloys: 6063, 6061, 6005A and 6082
6
finishes applied in the same plant
500 kg
minimum order per profile, per finish
Stacked aluminium billets end-on, with freshly cut profile sections behind

Four alloys, each with its temper

  • Architectural and decorative profiles; the best surface for anodising.

  • Machined and load-bearing parts.

  • Solar rails and thin-wall structural sections.

  • Heavy structural members and transport frames.

To EN 573-3 and EN 755-2

Alloy and temper guide

Six finishes, applied in-house

Finishing options
Mill-finish aluminium profiles stacked on a cooling table

Mill finish

As extruded, ready for your own finishing

Anodised aluminium profiles in champagne, bronze and black hanging on racks

Anodised

Clear, champagne, bronze or black

Aluminium profiles on a conveyor in a powder coating booth

Powder coated

RAL colours, matt or gloss

Aluminium window profiles with a wood-grain finish on a workbench

Wood-grain

Transfer film over a powder base coat

Glossy aluminium profiles lifted from an electrophoretic coating tank

Electrophoretic

Anodised, then a clear lacquer coat

Aluminium profile passing under a brushing wheel

Brushed

Brushed or polished before anodising

Die to packed profile, one plant

  1. Steel extrusion die held in gloved hands in front of a die rack
    01

    Die

    A new die cut to your drawing, or one from our die library.

  2. Aluminium profiles emerging from the extrusion press die
    02

    Extrude

    Billet pressed through the die, cooled, stretched and aged to temper.

  3. Anodising rack of aluminium profiles lifted out of a tank
    03

    Finish

    Anodised, powder coated, wood-grain or electrophoretic.

  4. CNC machine milling the end of an aluminium profile, wrapped bundles behind
    04

    Machine and pack

    Cut, drilled and milled, then film-wrapped by length.

  • EN 755-2
  • EN 12020-2
  • GB/T 5237
  • ASTM B221
Inside the plant

What we need to quote

Die and profile priced on one quote.

01 DrawingDWG · STEP · PDFA section drawing with wall thickness02 DieNew or oursOpen a new die, or pick from our library03 MOQ500 kgPer profile, per finish04 ToleranceEN 12020-2Or EN 755-9, named on the quote
How to order

Before the first order

Talk to an engineer

sales@billetmere.example.com

You reach a person who can read a section drawing.

Ask an engineer

  • A new die is quoted as its own line on the first order. If one of our existing dies fits your section, there is no die charge.

  • Send a RAL number or a physical sample. Powder coat is matched to RAL; anodised colours are matched to a sample we return for approval.

  • Yes. Profiles are cut to your length and can be drilled, punched or milled on our CNC centres before packing.

  • Each length is film-wrapped, bundled and packed in cartons or wooden crates, labelled with your part number.

  • Yes. Send your NDA with the drawing and we return it signed before we quote.

  • Yes. We extrude and finish sample lengths from the production die for your approval before the full run.

Send the drawing for a quote.

Alloy, temper, finish, length and quantity.

sales@billetmere.example.com
Attach drawings on the full form. Privacy policyFull quote form