Request a quote
Long factory bay in Jinan with a row of gantry CNC routers cutting full sheets of melamine board

CNC routers for cabinet, door and sign makers

Nesting, 4-axis and advertising routers built in Jinan. Send your sheet size and material, and we test-cut your file before you order.

Request a quote See the machines
Built in
Jinan, Shandong
Bed sizes
1325 · 1530 · 2040
Spindles
3.2 to 12 kW
Certified
CE · ISO 9001:2015
Before you order
Free test cut on your file

Six routers, by what you cut

All machines
ATC nesting router with a 12-position tool carousel cutting cabinet parts from melamine board

RM-N1325 · Cabinet carcasses and wardrobes nested from full sheets of melamine-faced board.

Work area
1300 × 2500 mm, 1530 and 2040 beds on order
Spindle
9 kW air-cooled ATC, 24 000 rpm
Tool change
12-position carousel
Table
6-zone phenolic vacuum table
Nesting cell with a lift loading table, label printer and push-off unloading conveyor

RM-N1325L · Panel furniture plants running two shifts with one operator per cell.

Work area
1300 × 2500 mm
Spindle
9 kW ATC plus 9-bit drilling block
Tool change
12-position carousel
Table
Lift loading, label printer, push-off unloading
4-axis swing-head CNC router machining an arched solid-wood door panel

RM-A1325 · Solid-wood doors, arched frames and side drilling without a second setup.

Work area
1300 × 2500 × 300 mm
Spindle
9 kW ATC, C-axis swing ±90°
Tool change
8-position linear rack
Table
T-slot and vacuum table
Four-spindle CNC router with four spindles in a row above an MDF cabinet door

RM-M1325 · Cabinet doors profiled, grooved and drilled in one pass.

Work area
1300 × 2500 mm
Spindle
4 × 3.5 kW air-cooled
Tool change
Pneumatic spindle switch
Table
Vacuum table
Advertising CNC router cutting acrylic letters on a T-slot and vacuum table

RM-S1325 · Acrylic letters, PVC foam and ACP signs for sign shops.

Work area
1300 × 2500 mm
Spindle
3.2 kW water-cooled, 18 000 rpm
Tool change
Manual ER20 collet
Table
T-slot and vacuum hybrid
Rotary-axis CNC router turning a carved wooden table leg on its fourth-axis lathe bed

RM-R1325 · Stair spindles, table legs and columns up to Ø300 mm.

Work area
1300 × 2500 mm, rotary Ø300 × 2500 mm
Spindle
5.5 kW air-cooled
Tool change
Manual ER32 collet
Table
Flat table plus 4th-axis bed

What our routers cut

All applications
  • Cut kitchen cabinet carcass panels stacked beside a nesting router

    Kitchen cabinets

    Carcasses and shelves nested from 18 mm melamine board on the RM-N1325.

  • Wardrobe panels with shelf-pin holes being unloaded from a CNC router

    Wardrobes and closets

    Tall sides with shelf-pin rows, labelled at the table on the RM-N1325L.

  • Routed MDF and solid-wood doors with raised panels leaning on a rack

    Doors and panels

    Raised MDF panels and arched solid-wood doors on the RM-A1325 and RM-M1325.

  • Acrylic sign letters and PVC foam lettering cut on a CNC router

    Signs and lettering

    Acrylic faces, PVC foam letters and ACP trays on the RM-S1325.

  • MDF shop fixtures and display shelving parts machined on a CNC router

    Shop fixtures

    MDF displays, slatwall and counters for shopfitters.

  • Turned and carved wooden table legs and columns from a rotary-axis router

    Legs and columns

    Turned and carved legs, balusters and columns on the RM-R1325.

Installs, and what they cut

Customer names shared on request.

All projects
  • Close-up of a cut kitchen cabinet side panel with drilled hinge holes under hard side lightTwo shifts, one operator

    Poland · RM-N1325L

    A cabinet plant nesting carcasses straight from full sheets

  • Close-up of an arched door panel machined in one setup on a 4-axis routerArch cut in one setup

    Mexico · RM-A1325

    Arched solid-wood doors for a door workshop

  • Close-up of thick acrylic letters cut and edge-finished in one passCut and edged in one pass

    UAE · RM-S1325

    Thick acrylic letters for a sign maker

From sample panel to running machine

Five steps for every order, each shown to you on video first.

Test cut of a customer sample panel on a CNC router, filmed for the buyerGantry being lowered onto a welded steel router bed on the assembly floorRouter running in on the factory floor, cutting test panels before cratingInspector checking the cut quality of a test panel during factory acceptanceCNC router crated on a steel base and being loaded into a shipping container

Station 1 of 5

Test cut

Send a panel or a DXF. We cut it on the model we are quoting and film the run.

You get a test-cut video

Build to your mains

Bed welded and stress-relieved, gantry fitted, cabinet wired to your voltage and frequency.

You get the wiring diagram

Run-in

The finished machine cuts test panels on the floor before anyone crates it.

You get the run-in log

Acceptance

Inspect it in Jinan or on a live video call before the balance is paid.

You get an acceptance video or a visit

Ship and commission

Crated on a steel skid. Commissioning by video as standard, on site on request.

You get remote setup and a spare-parts list

Assembly bay in the Jinan plant with router beds and gantries in progress
Assembly bay, Jinan. Beds at three build stages.

Routmere builds CNC routers in Jinan for export

Nesting, door and sign routers for furniture plants and sign shops abroad, welded, wired and run in our own bays.

About the factory
2014
founded in Jinan, Shandong
6
router families, built in-house
40+
countries with a Routmere router at work
Inspector checking gantry squareness with a dial indicator
Gantry squareness check before run-in.

Every gantry is logged before shipping

Squareness, runout and ±0.05 mm repeat positioning, measured on every machine.

CE
Machinery Directive
2006/42/EC
CE
EMC Directive
2014/30/EU
ISO 9001:2015
Quality management
Jinan plant
EAC
Machinery safety
TR CU 010/2011
Certificates and test logs

Send a sheet size. Get a configured quote.

Board, sheet size, sheets a day. An engineer replies within 24 hours.

WhatsApp an engineer
Used only to answer this request. Privacy policyFull quote form