Food-contact silicone products - colander, bottle sleeve, spatula and lids - laid diagonally across a dark cocoa table

Food-contact silicone

Custom silicone products made to your mould and colour

Compression and LSR moulding for private label, from a 12,600 m² plant in Qingdao.

Browse the product shelfSend your drawing

Own mould shop and colour lab

Four collections

Four collections one mould shop

Open the kitchen collection
Collapsible silicone colander draining water over a pale stone sink, folds moulded into the wall of the bowl
SD-KT · Collapsible colander SD-KT-01
Silicone suction divided plate stuck to a light wood table, the suction skirt visible at the rim with three food sections
SD-BF · Suction divided plate SD-BF-01
500 ml sport bottle with a silicone sleeve and straw standing on a pale surface, sleeve texture in soft side light
SD-HY · 500 ml sport bottle SD-HY-01
Silicone slow-feed bowl with moulded ridges holding dry kibble, seen from a low three-quarter angle on a grey floor
SD-PH · Slow-feed bowl SD-PH-01

Kitchen and bakeware

Food contact
LFGB · FDA 21 CFR 177.2600
Hardness
40 / 60 / 80 Shore A
Open this collection

Tooling and colour

In-house tooling & colour matching

Moulds, LSR and colour happen in the same building as the presses.

  • Aluminium mould core just off the machining centre, cavity and cooling channels visible on the face, fine chips still on the bench
    SD-TL

    In-house tooling

    • 6 CNC centres
    • 15–20 days to first shot
  • Cold runner block on a liquid silicone injection machine, translucent silicone in the runner channels beside the dosing barrel
    SD-LSR

    LSR injection

    • 8 machines
    • walls from 0.8 mm
  • Colour lab bench with Pantone swatches, a spectrophotometer and three moulded samples in off-white, terracotta and olive
    SD-CC

    Colour lab

    • Pantone matched
    • batch ΔE ≤ 1.5
  • SD-TLIn-house tooling6 CNC centres · 15–20 days to first shot
  • SD-CMCompression moulding24 presses · 5–800 g per part
  • SD-LSRLSR injection8 machines · walls from 0.8 mm
  • SD-CCColour labPantone matched · batch ΔE ≤ 1.5
  • SD-PKPrinting and retail packingSilk screen / laser · hangtag and colour box

See the workshop by process

Plant and files

Plant, presses & food-contact files

Every batch leaves with its own test report and a retained sample.

12,600

m² plant, including a Class 100,000 moulding area

38

compression presses and injection machines

Row of compression presses and material racks in a white-walled moulding hall, floors clean and machines in service
Vernier calliper across a moulded silicone part on a quality bench, retained sample bag and handwritten batch label beside it
  • LFGB
  • FDA 21 CFR 177.2600
  • EN 14372
  • REACH SVHC
  • RoHS
  • ISO 9001
  • BSCI

See certificates and test reports

Before tooling

What buyers ask before tooling

Pantone swatches and three silicone samples in off-white, terracotta and olive laid out on a pale bench
Get the sampling checklist
01.What does a mould cost, and who owns it?

Quoted by cavity count and steel grade. The mould is yours after twelve months of volume production — the transfer is written into the order.

02.What is the minimum order?

1,000 pieces per colour and size. Four colours or sizes can be mixed in one 3,000-piece run.

03.How close is the colour match?

Matched to your Pantone reference. Within one batch ΔE ≤ 1.5; between batches ΔE ≤ 2.5. A retained sample goes with the goods.

04.Which food-contact standards do you test to?

LFGB and FDA 21 CFR 177.2600, tested by a third party per batch, with the report in the carton. Baby items also run to EN 14372.

05.How long is sampling and production?

T1 sample in 7 days, mould in 15–20 days, production 25–30 days after sample approval. Air freight for samples, sea for volume.

06.Can you pack under my own label?

Colour box, hangtag, barcode and Amazon FNSKU. We also build the carton spec to your warehouse’s pallet height.

Silicone parts laid out on a dark brown bench next to a drawing marked with section lines

Request a quote

Send your drawing & target quantity

We use these details to answer this enquiry and nothing else. See theprivacy policy.

or send the file straight tosales@silexden.example ·WhatsApp