VITRINEXGlass
Request a quoteEnquire
The polished edge of a laminated safety glass panel held in teal cut-resistant gloves, both plies and the clear interlayer visible, a vacuum lifter on the face
Architectural glass · Shandong

Architectural glass to project drawings

Browse the glass range

Jumbo low-iron sheets to 3,300 × 8,000 mm, inspected lite by lite.

Glass types

Six glass families

Standard sheets by model, project lites cut to your drawings.

Compare specifications
Project record

Recent project record

Four recent packages, as the drawings arrive.

  1. Curtain wall elevation of a mixed-use tower in Doha, unitized glass modules in a regular grid, no signage visible
    01

    Mixed-use tower curtain wall

    Doha, Qatar · 4,200 m² · VTX-IG24 + VTX-L88 · 2025

  2. Sloped glass skylight over an airport terminal roof in Jutland, laminated glass panels on steel mullions under an overcast sky
    02

    Airport terminal skylight

    Jutland, Denmark · 860 m² · VTX-B8 bent tempered · 2025

  3. Metro station entrance canopy and glass balustrade in Melbourne, laminated glass fins and point fixings, no signage
    03

    Metro station balustrade and canopy

    Melbourne, Australia · 620 m² · VTX-L1010 SGP · 2024

  4. Hospital atrium glazing in Rotterdam, a full-height vertical glass wall with slim mullions, seen from inside the atrium
    04

    Hospital atrium glazing

    Rotterdam, Netherlands · 1,150 m² · VTX-T12 + VTX-C6 · 2024

No client, architect or certificate number is named.

See all projects
The exit end of a glass tempering furnace: rollers, vacuum lifters and a worker in coveralls seen from behind, quality bench at the side
Factory

Inside the plant

Tempering, laminating and insulating under one roof since 2011.

  • 2011Plant opened, Tengzhou
  • 26,000 m²Under roof, 90 min to Qingdao Port
  • 1.1 million m²Processed per year, 210 staff
See the factory
Quality

Standards and markets

Every lite measured and recorded against the standard it ships under.

  • ISO 9001:2015Quality management
  • EN 12150-1Tempered · CE marking, EU / UK
  • EN ISO 12543Laminated · CE marking, EU / UK
  • EN 1279-2 · EN 1096-2Insulating units and coated glass · EU / UK
  • ASTM C1048 · ANSI Z97.1North America
  • AS/NZS 2208Australia / New Zealand

Certificates and the model × market matrix live on the certifications page.

A glass fragmentation test tray next to a vernier caliper on an insulating glass unit cross-section, operator hands in frame
Capacity

Capacity in numbers

Drawings in DWG or DXF; tolerances confirmed before we cut.

  • 3,300 × 8,000 mmLargest sheet on the tempering line
  • 4–19 mmTempered thickness range
  • ±0.5 mmCut and hole tolerance from drawings
  • Ø2.6 m × 6,000 mmLaminating autoclave
Check the tolerances
Macro of a freshly cut and drilled glass edge from a CNC machine, glass dust and coolant still on the surface
Enquiry

Send your cut list

A-frame export crates of glass lites ready for the port, lites separated by cork pads, warehouse floor in front

Sizes, glass build-up and quantity — we reply within one working day.

We use these details only to answer this enquiry — privacy policy.